Gravel Calculator

Work out how much gravel you need for a driveway, path, patio or bed, in cubic yards, tons and bags, with an optional cost.

0 cubic yards
Enter the size and depth to see how much gravel you need.
0tons (US)
0metric tonnes
0cubic feet
0cubic meters
0bags
–estimated cost

All results include your extra percentage. Gravel weight changes with the stone, the size and how wet it is, so check the figure your supplier uses.

How to work out how much gravel you need

Gravel is measured by volume (cubic yards or cubic meters) and usually sold by volume or by weight (tons). The calculator does both steps for you, but the math is short enough to check by hand.

  1. Measure the length and width of the area in feet. For a circle, measure the diameter.
  2. Multiply length by width to get the area in square feet. For a circle, use π × radius².
  3. Turn the depth into feet by dividing the inches by 12, then multiply it by the area. That gives cubic feet.
  4. Divide cubic feet by 27 to get cubic yards.
  5. For the weight, multiply cubic feet by the gravel’s weight per cubic foot and divide by 2,000 to get tons.

ExampleDriveway. A gravel driveway 40 ft long and 12 ft wide, 4 inches deep: 40 × 12 = 480 sq ft. 4 in ÷ 12 = 0.333 ft, so the volume is 480 × 4 ÷ 12 = 160 cu ft, or 160 ÷ 27 = 5.93 cubic yards. As dry gravel at 105 lb per cu ft it weighs 160 × 105 = 16,800 lb, which is 8.40 tons.

ExampleRound bed. A circular bed 10 ft across, 3 inches deep: the radius is 5 ft, so the area is π × 5² = 78.54 sq ft. The volume is π × 5² × 3 ÷ 12 = 19.63 cu ft, or 0.73 cubic yards, about 1.03 tons of dry gravel.

How much does a cubic yard of gravel weigh?

Gravel is mostly stone with air between the pieces, so a cubic yard weighs less than solid rock. Engineering ToolBox gives 105 lb per cubic foot for dry gravel and 125 lb per cubic foot for wet gravel, because water fills the gaps. A cubic yard is 27 cubic feet, which gives these figures:

Gravellb per cu ftlb per cu ydTons per cu ydCu yd per tonkg per m³
Dry1052,8351.420.711,680
Wet1253,3751.690.592,000

Crushed stone, pea gravel, river rock and recycled concrete can weigh more or less than this, depending on the stone and the size of the pieces. If your supplier quotes a weight per cubic yard or per cubic foot, choose “My supplier’s figure” and enter it, so the tons match what they will deliver.

How much area does a ton or a cubic yard of gravel cover?

Coverage depends only on depth. One cubic yard spread 1 inch deep covers 27 × 12 = 324 sq ft. At 2 inches it covers half that, at 3 inches a third, and so on. A ton covers a bit less than a cubic yard of dry gravel, because a ton of dry gravel is only 19.05 cu ft.

DepthSq ft per cu ydSq ft per ton (dry)Sq ft per ton (wet)
1 in324228.57192
2 in162114.2996
3 in10876.1964
4 in8157.1448
6 in5438.1032

Ordering by the ton? Divide your area by the “per ton” figure for your depth. 500 sq ft at 3 inches of dry gravel is 500 ÷ 76.19 = 6.56 tons.

Gravel for common jobs

These examples use dry gravel at 105 lb per cu ft and no extra. The depths are examples only; the right depth depends on the job, the ground and the stone, so ask your supplier or installer.

Job (example)SizeDepthCubic yardsTons (dry)
Garden path3 × 25 ft2 in0.460.66
Shed base8 × 10 ft4 in0.991.40
Patio12 × 12 ft4 in1.782.52
Parking pad10 × 20 ft4 in2.473.50
Single driveway12 × 40 ft4 in5.938.40
Double driveway20 × 50 ft4 in12.3517.50

How many bags of gravel make a cubic yard?

Bagged gravel is sold by volume, often in half-cubic-foot bags. Divide 27 cubic feet by the bag size. For larger jobs, compare the bag count and price with a bulk delivery.

Bag sizeBags per cubic yardBags per ton of dry gravel
0.5 cu ft5439
0.75 cu ft3626
1 cu ft2720
2 cu ft1410

Whole bags are rounded up. The calculator rounds up the same way, so 2 cu ft bags show 14 bags for one cubic yard.

Gravel in metric: cubic meters and tonnes

Switch the calculator to metric to work in meters and centimeters. Multiply the area in square meters by the depth in meters to get cubic meters, then multiply by 1,680 kg per m³ for dry gravel (2,000 for wet) and divide by 1,000 for tonnes.

ExampleMetric. A path 6 m long and 4 m wide, 7.5 cm deep: 6 × 4 × 0.075 = 1.8 m³. As dry gravel that is 1.8 × 1,680 = 3,024 kg, or 3.02 tonnes.

Ordering: tons or cubic yards?

Suppliers price gravel per ton, per cubic yard or per bag. To compare prices, convert with the weight they use. At 105 lb per cu ft, one cubic yard is 1.42 tons, so a price per ton times 1.42 gives the price per cubic yard.

ExamplePrice. If gravel costs $45 per ton (an example price, not a quote), a cubic yard of dry gravel costs about 45 × 2,835 ÷ 2,000 = $63.79.

  • Add a little extra for uneven ground, edges and settling. Enter it as a percentage in the calculator.
  • Wet gravel weighs more for the same volume, so a load sold by weight covers less ground when the stone is wet.
  • Ask whether the price includes delivery, and whether there is a minimum load.

US tons and metric tonnes

A US ton (also called a short ton) is 2,000 lb. A metric tonne is 1,000 kg, which is 2,204.62 lb, so one tonne is about 1.10 US tons. The calculator shows both. If a supplier quotes “tons”, check which one they mean.

L-shaped and irregular areas

Split the area into rectangles and circles, work out each one, and add them. You can also add up the square feet with the square footage calculator, then choose “I know the total area” here and enter the total.

ExampleL-shaped path. A 20 × 10 ft section plus an 8 × 5 ft section, 3 inches deep: (200 + 40) × 3 ÷ 12 = 60 cu ft, which is 2.22 cubic yards or 3.15 tons of dry gravel.

Weights: Engineering ToolBox, “Dirt and Mud – Densities” (gravel, dry: 105 lb/ft³, 1,680 kg/m³; gravel, wet: 125 lb/ft³, 2,000 kg/m³). Need other materials? See the cubic yard calculator and the cubic yard cheat sheet.

Results are estimates based on the numbers you enter. Confirm quantities with your supplier, installer or contractor before ordering.

Frequently asked questions

How much gravel do I need for a 10 x 10 area?

At 4 inches deep, a 10 ft by 10 ft area needs 33.33 cubic feet, which is 1.23 cubic yards, or about 1.75 tons of dry gravel.

How many tons are in a cubic yard of gravel?

About 1.42 tons for dry gravel at 105 lb per cubic foot, and about 1.69 tons for wet gravel at 125 lb per cubic foot.

How many cubic yards are in a ton of gravel?

About 0.71 cubic yards of dry gravel, or 0.59 cubic yards of wet gravel.

How much area does a ton of gravel cover?

A ton of dry gravel covers about 114.29 sq ft at 2 inches deep, 76.19 sq ft at 3 inches and 57.14 sq ft at 4 inches.

How much area does a cubic yard of gravel cover?

One cubic yard covers 162 sq ft at 2 inches deep, 108 sq ft at 3 inches and 81 sq ft at 4 inches.

Should I order gravel by the ton or by the cubic yard?

Either works. Use the unit your supplier prices in, and ask what weight per cubic yard they use so you can convert between the two.

Why does wet gravel weigh more?

Water fills the gaps between the stones. The volume you need does not change, but a load sold by weight contains less stone when it is wet.

How many bags of gravel are in a cubic yard?

It takes 54 half-cubic-foot bags, 27 one-cubic-foot bags or 14 two-cubic-foot bags to make a cubic yard.

What about pea gravel, crushed stone or river rock?

Their weight depends on the stone and the size of the pieces. Ask your supplier for the weight per cubic foot or per cubic yard and enter it as “My supplier’s figure”.

How do I enter the depth in inches?

Type the depth in inches; the calculator converts it to feet for you. To do it by hand, divide the inches by 12, so 3 inches is 0.25 ft.